Tall Edition 16” Loom

Loom Specs:
Weaving Width: 13"
Weaving Length without Shedding Device: 51" with continuous warping 
Weaving Length with Shedding Device: 47" with continuous warping
Loom Width: 16
Weight: 6 lbs

*Notes: The weaving lengths listed factor in warp waste. You can weave the "without the shedding device" weaving length with the shedding device if you use it and then remove at the very end and finish off the piece without it. 

Click here to see this loom's full specs compared to Mirrix's other looms

Loom Description:
Recently a customer asked us if we could make for her a tall version of the 16" Big Sister Loom. We thought: "Why not?" and made her one. She loves it and we couldn't stop thinking about it. It checks a lot of boxes for anyone who prefers to weave thinner and longer pieces and wants their loom to be as portable as possible. The loom is as thin as a 16" Loom but as tall as a 22". It is the perfect loom for table runners, small rugs, belts, guitar straps and more! 

Loom Materials: The top and bottom beams are made of anodized aluminum; the sidebars are made of steel and copper; the wooden clips are made of maple

Included:
Four coils: 8, 12, 14, 18 dents, shedding device and handle, two wooden clips, warping bar, flat wrench, Allen wrench, warp coil/spring bar, and written instructions.

Additional Information:
Positioning: Upright with two fold-out legs on a table or on The Mirrix Harvey Stand.

Shedding Device: Yes. Click here to learn more about the Mirrix shedding device. Note: The shedding device doesn’t have to be used for every project. When warping you can choose to put the shedding device on the loom or not to.

If you plan on using the shedding device with this loom, you will want to buy or make heddles. 

Available accessories: Bottom Spring Kits, Shasta Combs, The No Warp-Ends Kit, the Extra Warping Bar Kit, The Electric Spencer Treadle, The Mirrix Harvey Stand, Add-On Bottom Beam, Extra Shedding Device

Click here to learn more about which loom accessories you might want to purchase now or in the future. 

If you need help deciding which loom is best for your needs, click here to get a personalized loom recommendation. 

Click here to learn about what you need to get started weaving.

When warping, we recommend making sure you have 6" of threaded rod covered like for the 22" loom and larger rather than 4" like for the regular 16" loom.

PRODUCT DISCLAIMER AND WARNING: Users are encouraged to always use caution and care when handling weaving equipment. Mirrix Looms and accessories may have sharp, heavy and/or small parts. They are not intended for use by children. Warp coils must be secured and removed carefully as they have sharp ends. Combs may have sharp surfaces and should be handled with caution. Disassembling looms may cause parts not to align or fit properly when reassembling. Mirrix Tapestry & Bead Looms Ltd. is not liable for injury or equipment damage resulting from user misuse.