[Extra/Replacement] Wooden Clips

$38.00

Shipping calculated at checkout.

Quantity

Individually hand milled in the United States of beautiful hardwoods, these clips hold the warping bar when warping your loom and then hold the shedding device if you're using it. These clips may be used as an extra set or to replace your clips if you're using the older, black plastic clips and want to switch to the wooden ones. These clips are sold as a pair.

This is how to put wooden clips on your loom:

Separate the top and the bottom halves of the loom (simply slide the top part off of the bottom part). Use a pair of needle-nosed pliers to pull the metal sleeves out of the loom's copper sidebars. Remove the old clips (if there were already wooden clips on the loom). Slide the new wooden clips onto the copper sidebars. Replace the metal sleeves into the copper sidebars. Put the two halves of the loom back together.

PRODUCT DISCLAIMER AND WARNING: Users are encouraged to always use caution and care when handling weaving equipment. Mirrix Looms and accessories may have sharp, heavy and/or small parts. They are not intended for use by children. Warp coils must be secured and removed carefully as they have sharp ends. Combs may have sharp surfaces and should be handled with caution. Disassembling looms may cause parts not to align or fit properly when reassembling. Mirrix Tapestry & Bead Looms Ltd. is not liable for injury or equipment damage resulting from user misuse.