Warp Coils (Springs)

Available in 4, 5, 8, 10, 12,14, 16, 18, 20 or 22 Dents Per Inch.

The 4 and 5 dent coils are only available for the 12", 16", 19", 22", 28", 32" and 38" Looms. These warp coils have coated ends. 

Only 14, 16, 18, 20 and 22 dent warp coils are available for the 5" Mini Mirrix Loom.

Choose your loom size and the coil size in the drop-down menus. 

How do you know what warp coil to use? 

For Bead Weaving:  

Place the beads you plan on weaving on a needle and measure an inch. Then, count how many beads are in that inch. The number of beads minus one is the warp coil that will be used. For example, if you are using Delicas you would find 19 Delicas are in one inch, so you would use the 18 dent coil. There is some leeway in this, and depending on the beads you are using, it might not work out perfectly (numerically), just close. Using a smaller (lower number) coil is better than using a larger (higher number) coil.

For Tapestry:

This is something you have to experiment with as a tapestry weaver. For finer weft, you will want to use a warp coil with more dents per inch. For thicker weft, you will want to use a warp coil with fewer dents per inch or even warp every other dent. (For example, an 18 dent warp coil every other dent is equal to a 9 dent warp coil.

PRODUCT DISCLAIMER AND WARNING: Users are encouraged to always use caution and care when handling weaving equipment. Mirrix Looms and accessories may have sharp, heavy and/or small parts. They are not intended for use by children. Warp coils must be secured and removed carefully as they have sharp ends. Combs may have sharp surfaces and should be handled with caution. Disassembling looms may cause parts not to align or fit properly when reassembling. Mirrix Tapestry & Bead Looms Ltd. is not liable for injury or equipment damage resulting from user misuse.